Multi-Purpose Metal Primer

A water-based metal primer for most ferrous and non-ferrous surfaces.

A primer for new and old galvanized iron, stainless steel and aluminium surfaces. Can be top-coated with Rust Rite and many other Alkyds, Acrylics and Polyurethanes.

BENEFITS

  • Good adhesion to galvanized iron, stainless steel and aluminium surfaces.
  • Water-based, non-toxic and non-flammable.
  • Quick drying.
  • Low odour
  • Can be over-coated.

SURFACE PREPARATION
Wash down surfaces with Rust Rite Wunda Clean making sure surfaces are free from dirt, grease, oil and salt contaminants.

Galvanized Iron

Aluminium & Stainless Steel:

APPLICATION

  • Mix the paint well.
  • Apply by brush, roller or spray application.
  • Thinning is not generally necessary as product is ready for use.

Coverage : Approximately 10-12sq/m per coat based on a dry film thickness 35 microns.
Type : Modified Acrylic.
Drying @ 23° C : Touch dry 30-50 mins.
Re-coating @ 23°C : With water-based topcoat 2 hours. With Rust Rite or any solvent based topcoat 24 hours.
Volume solids : 40%
Rec Film thickness : WFT- 60 microns DFT- 30 microns
Application temp. : 5 – 30°C
Clean up : With water.
Service temp : 10 – 90°C
Viscosity : 72 – 76 KU
NVC by mass : 50+/-0.5%
S.G. : 1,24
Flash point : N/A
Pack size : 250ml, 500 ml, 1 lt and 5 lt.
Shelf life : 1 year.
Colour : Lt. Grey

PRECAUTIONS

  • Do not thin with solvents.
  • Do not mix with other metal primers.
  • Do not overcoat with epoxies.

SAFETY

  • Product is non-flammable and non-toxic.
  • Refer to Material Safety Data Sheet for details.